Document

Circular Welded Carbon-Quality Steel Pipe From the United Arab Emirates: Preliminary Results of Antidumping Duty Administrative Review; 2023-2024

The U.S. Department of Commerce (Commerce) preliminarily determines that producers/exporters subject to this review made sales of subject merchandise at less than normal value (...

Department of Commerce
International Trade Administration
  1. [A-520-807]

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) preliminarily determines that producers/exporters subject to this review made sales of subject merchandise at less than normal value (NV) during the period of review (POR), December 1, 2023, through November 30, 2024. Interested parties are invited to comment on these preliminary results of review.

DATES:

Applicable June 3, 2026.

FOR FURTHER INFORMATION CONTACT:

Rebecca Janz, AD/CVD Operations, ( printed page 33143) Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-2972.

SUPPLEMENTARY INFORMATION:

Background

On January 27, 2025, based on timely requests for review, in accordance with 19 CFR 351.221(c)(1)(i), we initiated an administrative review of the antidumping duty order on circular welded carbon-quality steel pipe (CWP) from the United Arab Emirates (UAE). [1] On February 25, 2025, Commerce selected Conares Metal Supply Limited (Conares) and THL Tube and Pipe Industries LLC; KHK Scaffolding and Formwork LLC; and Universal Tube and Pipe Industries FZE (collectively, Universal) as the mandatory respondents in this review.[2]

On December 9, 2024, Commerce tolled deadlines for all administrative reviews by 90 days.[3] Additionally, due to the lapse in appropriations and Federal Government shutdown, on November 14, 2025, Commerce tolled all deadlines in administrative proceedings by 47 days,[4] and, due to a backlog of documents that were electronically filed via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS) during the Federal Government shutdown, on November 24, 2025, Commerce tolled all deadlines in administrative proceedings by an additional 21 days.[5] On January 22, 2026, we extended the preliminary results of this review to no later than May 29, 2026.[6]

For a complete description of the events that followed the initiation of this review, see the Preliminary Decision Memorandum.[7] A list of topics discussed in the Preliminary Decision Memorandum is included as an appendix to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via ACCESS. ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/​frnotices.

Scope of the Order

The merchandise subject to the Order is CWP from the UAE. For a full description of the scope of the Order, see the Preliminary Decision Memorandum.

Methodology

Commerce is conducting this review in accordance with section 751(a) of the Tariff Act of 1930, as amended (the Act). Export price and constructed export price are calculated in accordance with section 772 of the Act. NV is calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memorandum.

Rates for the Non-Individually Examined Companies

The Act and Commerce's regulations do not address the establishment of a rate to apply to companies not selected for individual examination when Commerce limits its examination in an administrative review pursuant to section 777A(c)(2) of the Act. Generally, Commerce looks to section 735(c)(5) of the Act, which provides instructions for calculating the all-others rate in a market economy investigation, for guidance when calculating the rate for companies which were not selected for individual examination in an administrative review.

Under section 735(c)(5)(A) of the Act, the all-others rate is normally an amount equal to the weighted average of the estimated weighted average dumping margins established for exporters and producers individually investigated, excluding any rates that are zero, de minimis ( i.e., less than 0.5 percent), or determined entirely on the basis of facts available. Where the weighted-average dumping margin for each of the individually examined respondents is zero, de minimis, or based entirely on facts available, section 735(c)(5)(B) of the Act provides that Commerce may use “any reasonable method to establish the estimated all-others rate for exporters and producers not individually investigated, including averaging the estimated weighted average dumping margins determined for the exporters and producers individually investigated.”

In this administrative review, we preliminarily calculated weighted-average dumping margins for the mandatory respondents, Conares and Universal, that are not zero, de minimis, or based entirely on facts otherwise available. Accordingly, we are preliminarily assigning to the companies under review that were not selected for individual examination a weighted-average dumping margin equal to the weighted average of the estimated weighted-average dumping margins calculated for Conares and Universal, weighted by the mandatory

( printed page 33144)

respondents' publicly ranged total sales values, consistent with the guidance in section 735(c)(5)(A) of the Act.[8]

Preliminary Results of Review

As a result of this review, we preliminarily determine the following estimated weighted-average dumping margins exist for the period December 1, 2023, through November 30, 2024:

Producer/exporter Weighted-average dumping margin (percent)
Conares Metal Supply Limited 3.15
THL Tube and Pipe Industries LLC; KHK Scaffolding and Formwork LLC; Universal Tube and Pipe Industries FZE 6.16
Ajmal Steel Tubes & Pipes Ind. L.L.C.-Branch-1; Ajmal Steel Tubes & Pipes Ind. L.L.C 5.50
K.D. Industries Inc 5.50
TSI Metal Industries L.L.C 5.50

Disclosure

Commerce intends to disclose its calculations and analysis performed to interested parties for these preliminary results within five days of any public announcement or, if there is no public announcement, within five days of the date of publication of this notice, in accordance with 19 CFR 351.224(b).

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance. Pursuant to 19 CFR 351.309(c)(1)(ii), we have modified the deadline for interested parties to submit case briefs to Commerce to no later than 21 days after the date of the publication of this notice.[9] Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs.[10] Interested parties who submit case briefs or rebuttal briefs in this proceeding must submit: (1) a table of contents listing each issue; and (2) a table of authorities.[11] All briefs must be filed electronically using ACCESS. An electronically filed document must be received successfully in its entirety in ACCESS by 5:00 p.m. Eastern Time on the established deadline.

As provided under 19 CFR 351.309(c)(2)(iii) and (d)(2)(iii), we request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs.[12] Further, we request that interested parties limit their executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final results in this administrative review. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).[13]

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance, filed electronically via ACCESS by 5:00 p.m. Eastern Time within 30 days after the date of publication of this notice.[14] Requests should contain: (1) the party's name, address, and telephone number; (2) the number of participants; and (3) a list of issues to be discussed. Oral presentations at the hearing will be limited to issues raised in the briefs. If a request for a hearing is made, Commerce will inform parties of the scheduled date for the hearing.[15]

Assessment Rates

Pursuant to section 751(a)(2)(A) of the Act and 19 CFR 351.212(b)(1), Commerce will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries of subject merchandise in accordance with the final results of this review.

If Conares' or Universal's weighted-average dumping margin is not zero or de minimis ( i.e., less than 0.50 percent) in the final results of this review, Commerce intends to calculate importer-specific assessment rates on the basis of the ratio of the total amount of dumping calculated for each importer's examined sales to the total entered value of those sales. Where we do not have entered values for all U.S. sales to a particular importer, we will calculate an importer-specific, per-unit assessment rate on the basis of the ratio of the total amount of dumping calculated for the importer's examined sales to the total quantity of those sales.[16] To determine whether an importer-specific, per-unit assessment rate is de minimis, in accordance with 19 CFR 351.106(c)(2), we also will calculate an importer-specific ad valorem ratio based on estimated entered values. If Conares' or Universal's weighted-average dumping margin is zero or de minimis or where an importer-specific ad valorem assessment rate is zero or de minimis, we will instruct CBP to liquidate appropriate entries without regard to antidumping duties.[17]

In accordance with Commerce's “automatic assessment” practice, for entries of subject merchandise during the POR produced by Conares or Universal for which the company did not know that the merchandise was destined for the United States, we intend to instruct CBP to liquidate those entries at the all-others rate calculated in the less-than-fair-value (LTFV) ( printed page 33145) investigation if there is no rate for the intermediate company(ies) involved in the transaction.[18]

For the companies listed above that were not selected for individual review, we will assign an assessment rate based on the review-specific rate, calculated as noted in the “Rate for Non-Individually Examined Companies” section, above. The final results of this review shall be the basis for the assessment of antidumping duties on entries of merchandise covered by the final results of this review and for future deposits of estimated duties, where applicable.[19]

Commerce intends to issue assessment instructions to CBP regarding Conares, Universal, and the non-individually examined companies no earlier than 35 days after the date of publication of the final results of this review in the Federal Register . If a timely summons is filed at the U.S. Court of International Trade, the assessment instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired ( i.e., within 90 days of publication).

Cash Deposit Requirements

The following deposit requirements will be effective for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) the cash deposit rate for the companies listed above will be that established in the final results of this review, except if the rate is less than 0.50 percent and, therefore, de minimis within the meaning of 19 CFR 351.106(c)(1), in which case the cash deposit rate will be zero; (2) for previously investigated or reviewed companies not covered by this review, the cash deposit rate will continue to be the company-specific cash deposit rate published for the most recently completed segment of this proceeding in which the company participated; (3) if the exporter is not a firm covered in this review, or the LTFV investigation, but the manufacturer is, then the cash deposit rate will be the rate established for the most recent segment for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 5.95 percent, the all-others rate established in the LTFV investigation.[20] These cash deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice also serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification to Interested Parties

We are issuing and publishing these preliminary results in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.221(b)(4).

Dated: May 29, 2026.

Christopher Abbott,

Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

Appendix

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Scope of the Order

IV. Discussion of the Methodology

V. Currency Conversion

VI. Recommendation

Footnotes

1.   See Initiation of Antidumping and Countervailing Duty Administrative Reviews,90 FR 8187 (January 27, 2025) ( Initiation Notice); see also Circular Welded Carbon-Quality Steel Pipe from the Sultanate of Oman, Pakistan, and the United Arab Emirates: Amended Final Affirmative Antidumping Duty Determination and Antidumping Duty Orders,81 FR 91906 (December 19, 2016) ( Order). In the Initiation Notice, we stated that we initiated a review of Tiger Steel Industries LLC (Tiger Steel). However, Commerce previously determined that TSI Metal Industries L.L.C. is the successor-in-interest to Tiger Steel; thus, Tiger Steel is not a separate company subject to this review. See Circular Welded Carbon-Quality Steel Pipe from the United Arab Emirates: Final Results of Antidumping Duty Administrative Review; 2019-2020,87 FR 41112 at n.3 (July 11, 2022).

Back to Citation

2.   See Memorandum, “Respondent Selection,” dated February 25, 2025. Commerce previously determined that Universal is a single entity consisting of the following three producers/exporters of subject merchandise: Universal Tube and Plastic Industries, Ltd.; KHK Scaffolding and Formwork LLC; and Universal Tube and Pipe Industries LLC. See Circular Welded Carbon-Quality Steel Pipe from the United Arab Emirates: Final Determination of Sales at Less Than Fair Value,81 FR 75030 (October 28, 2016), and accompanying Issues and Decision Memorandum. Additionally, we previously determined that THL Tube and Pipe Industries LLC is the successor-in-interest to Universal Tube and Pipe Industries LLC. See Circular Welded Carbon-Quality Steel Pipe from the United Arab Emirates: Final Results of Antidumping Duty Administrative Review; 2016-2017,84 FR 44845 (August 27, 2019). During the POR, we further determined that Universal Tube and Pipe Industries FZE is the successor-in-interest to Universal Tube and Plastic Industries, Ltd. See Circular Welded Carbon-Quality Steel Pipe from the United Arab Emirates: Final Results of Antidumping Duty Changed Circumstances Review,89 FR 76087 (September 17, 2024).

Back to Citation

3.   See Memorandum, “Tolling of Deadlines for Antidumping and Countervailing Duty Proceedings,” dated December 9, 2024.

Back to Citation

4.   See Memorandum, “Deadlines Affected by the Shutdown of the Federal Government,” dated November 14, 2025.

Back to Citation

5.   See Memorandum, “Tolling of all Case Deadlines,” dated November 24, 2025.

Back to Citation

6.   See Memorandum, “Extension of Deadline for Preliminary Results of Antidumping Duty Administrative Review,” dated January 22, 2026.

Back to Citation

7.   See Memorandum, “Decision Memorandum for the Preliminary Results of the Administrative Review of the Antidumping Duty Order on Circular Welded Carbon-Quality Steel Pipe from United Arab Emirates; 2023-2024,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

Back to Citation

8.  With two respondents under examination, Commerce normally calculates: (A) a weighted-average of the dumping margins calculated for the examined respondents; (B) a simple average of the dumping margins calculated for the examined respondents; and (C) a weighted-average of the dumping margins calculated for the examined respondents using each company's publicly ranged U.S. sale quantities for the merchandise under consideration. Commerce then compares (B) and (C) to (A) and selects the rate closest to (A) as the most appropriate rate for all other producers and exporters. See, e.g., Ball Bearings and Parts Thereof from France, Germany, Italy, Japan, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Final Results of Changed-Circumstances Review, and Revocation of an Order in Part,75 FR 53661, 53663 (September 1, 2010); see also Memorandum, “Calculation of the Preliminary Weighted-Average Dumping Margin for the Companies Not Selected for Individual Examination,” dated concurrently with this notice.

Back to Citation

10.   See 19 CFR 351.309(d); see also Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings,88 FR 67069, 67077 (September 29, 2023) ( APO and Service Procedures).

Back to Citation

12.  We use the term “issue” here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.

Back to Citation

13.   See APO and Service Procedures.

Back to Citation

17.   See 19 CFR 351.106(c)(2); see also Antidumping Proceeding: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Proceedings; Final Modification,77 FR 8101, 8103 (February 14, 2012).

Back to Citation

18.  For a full discussion of this practice, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties,68 FR 23954 (May 6, 2003).

Back to Citation

19.   See section 751(a)(2)(C) of the Act.

Back to Citation

20.   See Order, 81 FR at 91908.

Back to Citation

[FR Doc. 2026-11118 Filed 6-2-26; 8:45 am]

BILLING CODE 3510-DS-P

Legal Citation

Federal Register Citation

Use this for formal legal and research references to the published document.

91 FR 33142

Web Citation

Suggested Web Citation

Use this when citing the archival web version of the document.

“Circular Welded Carbon-Quality Steel Pipe From the United Arab Emirates: Preliminary Results of Antidumping Duty Administrative Review; 2023-2024,” thefederalregister.org (June 3, 2026), https://thefederalregister.org/documents/2026-11118/circular-welded-carbon-quality-steel-pipe-from-the-united-arab-emirates-preliminary-results-of-antidumping-duty-administ.